Baykee Aerospace (Guangdong) Imọ-ẹrọ Co., Ltd.
top
BK-TYN-M Serie Multi-mode Modular Hybrid Solar Inverter
Wo awọn aworan diẹ sii
Apejuwe:

TYN-M series modular multi-mode hybrid solar inverter is an intelligent multi-functional power supply ,which is specially designed for new energy requirements by Aerospace Baykee(Guangdong)Technology Co.,ltd. It is internally composed of solar MPPT controller, charger, rectifier, inverter, static switch, main control circuit and display alarm circuit. According to different working modes, it can work in different application environments, such as grid-connected solar power generation, off-grid solar power supply, solar energy storage, off-peak energy storage, UPS power supply and backup.

- +
0
- +
0
- +
0

Kan si Bayi Ṣe igbasilẹ Bi PDF
Ọja Apejuwe
Idahun Bayi

TYN-M series modular multi-mode hybrid solar inverter is an intelligent multi-functional power supply ,which is specially designed for new energy requirements by Aerospace Baykee(Guangdong)Technology Co.,ltd. It is internally composed of solar MPPT controller, charger, rectifier, inverter, static switch, main control circuit and display alarm circuit. According to different working modes, it can work in different application environments, such as grid-connected solar power generation, off-grid solar power supply, solar energy storage, off-peak energy storage, UPS power supply and backup.

During the day, the inverter use solar energy to supply power to the load . At the same time, it charges the battery and stores electric energy. The remaining energy is fed back to the power grid through the grid-connected inverter. When the solar energy is insufficient, the solar energy and the municipal electricity or the battery pack share the power to the load; When solar power is not available, it is powered by mains electricity; When there is no power supply or solar energy, it will be converted to battery backup inverter power supply. When the battery is running out of energy, it will send a generator start signal to start the generator and then turn it into generator power supply. Internal circuit of this hybrid inverter use microprocessor control automatic detection management, the 6th generation of ultra-low loss IGBT inverter, which is very high efficiency, low distortion, large screen LCD display, more user-friendly and more intuitive. Solar MPPT makes the best use of solar and the Intelligent battery management extends the battery life.

In order to adapt to different power supply environment, the inverter adopts multi-mode design and can be applied to single-phase or three-phase. The user can realize three-phase input and three-phase output ,three-phase input and single-phase output; or single-phase input and single-phase output, or single-phase input and three-phase output.

It is widely used in remote mountainous areas, no power areas, islands, as well as communication, transportation, factories, schools, hotels, commercial and household applications such as grid-connected solar power generation, off-grid power generation, energy storage systems and so on.

 

1.On-line working mode , high-speed static switch switching.

2.Adopting multi-mode design, meeting the needs of different system powersupply.

3.Using multi-feed type converter circuit structure, the energy of solar energy, power supply and battery can be distributed freely.

4.Suitable for wide range input of mains power, the input rectifier circuit adopts bidirectional converter. The power can be fed into the rectifier to supply power to the inverter, or the residual energy of the solar energy can be fed back to the grid.

5.Using a two-line conversion circuit of charging and discharging . it will be not only reasonable controlling charge and discharge, but also can absorb the instantaneous load energy reverse irrigation. The input end of the battery is added with a current-limiting soft start circuit to reduce the inrush current when the battery is powered on.

6.MPPT bus control technology, improving efficiency of solar energy, with preventing anti reverse connection and anti reverse designing.

7.Hybrid load design, suitable for computers, instruments, equipment and household electrical equipment, abbl.

8.Large screen humanized touch screen LCD+LED status indicator. Flow chart operation status intuitive display, intelligent icon touch button, tabular data, event record display, Chinese and English optional menu operation.

9.Modular design, convenient expansion, redundancy improve system reliability. You can also invest in stages. Reduce the maintenance time on site (if there is a fault, only need to replace the module on site).

10.Intelligent digital control technology: using high-speed DSP microcontroller and programmable logic devices to achieve circuit control, parameter setting, operation management, advanced self-inspection and self-detection functions, all the independent circuit connections on the circuit board for self-inspection and fault analysis. After digital transformation of sine wave voltage, and perfect operation of the new scheme, to meet your practical needs.

11.The sixth generation high - speed low - loss IGBT and three - level converter technology are adopted ,which is highly working efficiently and highly improving the reliability.

12.Superior load characteristics: fully meet the jump from 0 si 100% load without switching to bypass, and protect stable and reliable output.

13.Perfect protection functions: input and output over-voltage protection, input surge protection, phase sequence protection, battery overcharge and over-discharge protection, output overload short circuit protection, over-temperature protection and other system protection and alarm functions.

14.High performance dynamic characteristics: instantaneous controlling mode and effective value feedback controlling are adopted to achieve high dynamic regulation and reduce output voltage distortion.

15.Optional battery inspection module: single parameter can be measured and displayed on the display board. If there is any battery failure, please inform the administrator immediately.

16.Intelligent detection function:

When the microprocessor of this system detects all the power supply state, circuit breaker state, fuse state and all the working state of the circuit online. If there is any fault, protect it immediately and alert the administrator.

17.Intelligent communication:

RS232 and RS485 communication ports truly realize multi-purpose communication and remote monitoring.

Optional cloud monitoring card and SNMP card for remote monitoring and network management.

Optional dry contact interface, using passive contact to achieve the inverter state monitoring.

 

TYN-M Technical parameters

Awoṣe TYN-M-20K-M20 TYN-M-60K-M20 TYN-M-120K-M20 TYN-M-200K-M20
Rated output capacity 20kW 60kW 120kW 200kW
Working mode oorun、AC Hybrid storage inverter
Working turn Solar—Mains—Battery
Isolation type Non-isolated high frequency
Power module model TYN-M-20K-PM
Number of power modules can be configured 1pcs 1~3pcs 1~6pcs 1~10pcs
Solar
Max input capacity 10kW×2 10kW×6 10kW×12 10kW×20
Rated operating voltage 500V
Max input voltage 800V
MPPT range 400~800V
Max input current 25A×2
Input line 2 6 12 20
Gird(Converter)
Rated operating voltage L-L:380/400/415 VacL-N:220/230/240 Vac,

M-3Phase 4Wire(or single phase 2 wire) + PE

Rated operating frequency 50/60Hz
input voltage range ±25%,-40%(half load )
input frequency range ±10%
Input power factor ≥0.95(20~50% load )≥0.99(100%load)
Current harmonic

(2~39times)

≤5%(50%load)≤3%(100%load)
Max input capacity 30kW 90kW 180kW 300kW
Max output capacity 20kW 60kW 120kW 200kW
Max input current 45A 135A 270A 450A
Grid current DC component ≤0.5% current rated value
Island protection time 2s
Generator mode Yes
Output(inverter )
Rated working voltage L-L:380/400/415 VACL-N:220/230/240 VAC 3Phase 4Wire(or single phase 2 wire) + PE
Rated working frequency 50/60Hz±0.5Hz
Output voltage stabilization accuracy ≤±1%
Frequency tracking rate 0.2Hz/s~2Hz/s
Waveform distortion Sine wave, distortion≤3%(liner load )≤5%(non-liner load)
Output DC component ≤1%
Three-phase voltage phase deviation 2º
Dynamic transient characteristics The dynamic transient range of inverter output is less than 10%, and the transient recovery time is <20mS
Crest factor 3:1
Overload capacity 105% overload delay 10 minutes protection, 125% overload delay 1 minute, more than 150% protection immediately
Working system Three in and three out, three in and three out, single in and single out, single in and three out (optional)
Working mode On and off grid, off grid (optional)
No-load circulation in parallel ≤5%
Current imbalance in parallel ≤5%
Self aging function 25%,50%,75%,100% (optional)
Batiri
Rated voltage 240V (192V~288V Can be adjusted)
Max current 120A 360A 720A 1200A
Battery type Lead-acid batteries, lithium batteries (or similar batteries)
Battery capacity configurable
Charging mode Temperature compensated constant current, constant pressure (Three-stage @ lead-acid battery)
Float charging voltage 2.25V±1% /cell (@25℃lead-acid battery)
equal charging voltage 2.34V±1% /cell (@25℃lead-acid battery)
Temperature compensation -3mV/℃/cell (@ lead-acid battery)
Maximum charging capacity ≤50% (can be set), Expandable external isolation charger
System parameters
Switching time 0ms
Inverter efficiency ≥95%
Protection function Battery reverse connection protection, PV reverse connection protection, output short circuit, overload, over voltage, phase sequence, over temperature, fan fault, abbl
cooling way Temperature controlled air cooling
Protection grade IP20
Running environment temperature-20~50℃
Relative humidity 30%~95%(No condensation)
Running height (maximum) <1000 meters (1% drop in capacity per 100 meters, up to 4000 meters)
Installation method Based on customer’s requirements and the project site condition
Size W*D*H(mm) 800*200*1000 600*800*1200 600*800*1800 600*800*2200

 

TYN-M-20K-PM Power module technical parameters:

Awoṣe TYN-M-20K-PM
Rated output capacity 20kW
Main functional unit Solar MPPT controller, Mains double rectifier, Inverter double converter, Battery double converter
Isolation type Non-isolated high frequency
Type of double conversion converter IGBT Three level converter
Solar
Maximum input capacity 10kW×2
Rated operating voltage 500V
Maximum input voltage 800V
MPPT range 400~800V
Maximum input current 25A×2
Input line 2 input lines
Grid(converter)
Rated operating voltage 220/380Vac
Rated operating frequency 50/60Hz
Input voltage range ±25%,-40%(half load )
Input frequency range ±10%
Maximum input power capacity 30kW
Maximum output power capacity 20kW
Output (inverter)
Rated operating voltage 220/380Vac(Optional)
Rated operating frequency 50/60Hz±0.5Hz
Output voltage stabilization accuracy ≤±1%
Batiri
Rated voltage 240V(192V~288VCan be adjusted)
Maximum current 120A
System parameters
cooling way Temperature controlled air cooling
Protection grade IP20
Running environment temperature-20~50℃
Relative humidity 30%~95%(No condensation)
Running height (maximum) <1000 meters (1% drop in capacity per 100 meters, up to 4000 meters)
Installation method Plug-in
Size W*D*H 482*133*600

 

TYN-M series bypass module technical parameters:

Awoṣe TYN-M-60K-BY TYN-M-120K-BY TYN-M-200K-BY
Rated output capacity 60kW 120kW 200kW
Switch type SCR static switch
Rated operating voltage 220/380Vac
Rated operating frequency 50/60Hz
Input maximum voltage range ±25%
Input frequency range ±10%
Output voltage range ±10~25%(can be set)
cooling way Temperature controlled air cooling
Protection grade IP20
Running environment temperature-20~50℃
Relative humidity 30%~95%(No condensation)
Running height (maximum) <1000 meters (1% drop in capacity per 100 meters, up to 4000 meters)
Installation method Plug-in
Size W*D*H 482*133*600

 

The above data is reference data, if any changes are subject to the actual product.

Ibeere:: Idi ti yan wa?
A: A jẹ China Ṣiwaju awọn oke&oorun eto Olupese, 11 iriri ọdun ni ṣiṣe ati titaja
awọn oke & awọn ọja oorun.
100% Ayewo QC Ṣaaju Sowo.
Didara to dara julọ & Iṣẹ ti o dara julọ pẹlu idiyele Idije.
Iṣẹ lẹhin-tita to dara: 2 atilẹyin ọja ọdun ati ti o ba ṣeeṣe a pese fifi sori ati tunṣe lori aaye
Gbogbo awọn ọja wa ni ijẹrisi CE, ISO9001, ISO14001, OHSAS18000, Ijẹrisi TLC, ati Kannada
iwe eri itoju agbara
Ọja ni wiwa awọn 100 awọn ilu ati awọn orilẹ-ede ni gbogbo agbaye. Ni ọfiisi ni Pakistan, Ọstrelia, abbl.

 

 

Ti o ba ni diẹ ninu awọn iṣoro nipa BK-TYN-M Serie Multi-mode Modular Hybrid Solar Inverter, tabi fẹ lati mọ awọn alaye diẹ sii nipa 3 awọn ipele alakoso,3 eto awọn ipele,480 folti 3 awọn ipele alakoso,3 alakoso awọn olupese,480v 3 awọn ipele alakoso,abbl. Kaabo lati kan si wa!

Nwa siwaju si ibeere rẹ.

 

 

Fi ifiranṣẹ rẹ ranṣẹ si wa:
×
bk-tyn-m
1591870133-Lithium-Battery-Packs
afata
Soke & Oorun PV eto olupese
tẹlẹ 1 902 awọn ifiranṣẹ

  • Phoenix 10:12 AM, Loni
    Pẹlẹ o, ọwọn sir / madam, ku si oju opo wẹẹbu wa! Mo wa Phoenix,bawo ni mo ṣe le ba ọ sọrọ?